MG100-TP single drum climbing floor shearer is a continuous coal dropping, loading and transporting coal as one of the mining equipment, used in the general mining face, the cost of supporting equipment is low; The motor has large power, high strength of the fuselage, and can cut hard coal seams with thin layers of dirt. The thickness of the fuselage is the thinnest of the same power shearer produced in China, and the minimum thickness of the coal that can be mined is the lowest in China; The machine is equipped with a loading mechanism, the coal cut from the coal wall by the spiral roller is loaded to the working face conveyor through the loading mechanism, the loading effect is good; The operation handle and indicator are installed centrally for easy operation; The hydraulic traction system works reliably, has large traction force, and is equipped with a parking brake device, and the hydraulic components have good performance and are easy to replace; The machine is equipped with spray device, good dust removal effect, improve the working environment; The whole machine has good performance, simple and reliable structure, easy maintenance, especially suitable for small and medium-sized coal mines.
Performance characteristics:
The machine is suitable for gently inclined longwall mining face. It is used for coal seams with a thickness of 500mm-1000mm, moderately stable roof and medium hard coal (f=2~3) inclination less than 30°. In the coal face to form high-grade general mining, with light bendable scraper transport, single hydraulic support roof supporting. DTS650 (800), DTG650(800), DTL650 (800) belt conveyors or flameproof battery locomotives are used for centralized transportation in the mining area to transport the coal to the coal bin in the mining area and then out to form a complete unloading, loading and transportation system of the coal face in the extreme coal seam. The production capacity can reach 75~100t/h.
MG100-TP single drum climbing floor shearer is a continuous coal dropping, loading and transporting coal as one of the mining equipment, used in the general mining face, the cost of supporting equipment is low; The motor has large power, high strength of the fuselage, and can cut hard coal seams with thin layers of dirt. The thickness of the fuselage is the thinnest of the same power shearer produced in China, and the minimum thickness of the coal that can be mined is the lowest in China; The machine is equipped with a loading mechanism, the coal cut from the coal wall by the spiral roller is loaded to the working face conveyor through the loading mechanism, the loading effect is good; The operation handle and indicator are installed centrally for easy operation; The hydraulic traction system works reliably, has large traction force, and is equipped with a parking brake device, and the hydraulic components have good performance and are easy to replace; The machine is equipped with spray device, good dust removal effect, improve the working environment; The whole machine has good performance, simple and reliable structure, easy maintenance, especially suitable for small and medium-sized coal mines.
Performance characteristics:
The machine is suitable for gently inclined longwall mining face. It is used for coal seams with a thickness of 500mm-1000mm, moderately stable roof and medium hard coal (f=2~3) inclination less than 30°. In the coal face to form high-grade general mining, with light bendable scraper transport, single hydraulic support roof supporting. DTS650 (800), DTG650(800), DTL650 (800) belt conveyors or flameproof battery locomotives are used for centralized transportation in the mining area to transport the coal to the coal bin in the mining area and then out to form a complete unloading, loading and transportation system of the coal face in the extreme coal seam. The production capacity can reach 75~100t/h.
